Rotometals.com

Sold by the ingot. ~ 49-52 pounds each This Aluminum ingot is of very high purity 99.8% min and measures 4.5" x 6.5" x 30". If you would like large quantity of these ingots, please contact us for a...

This is a M Clamp used to bolt on ballast tank anodes, and can also we used to bolt on other rod type anodes5.25" Over all height2-5/8" Deep

Sold by the block or full ingot about 44-46 pounds each and measures 7.25"x 9.5"x 3" HighThe melting temperature is 1167 F. Physical Information Atomic Number - 51Relative Atomic Mass (12C=12.000)...

Sold by the Bag (1 Quantity = 5 Pounds total)Important - You will receive 5 (or whatever quantity you ordered) pounds of 99.6% minimum purity Antimony in a chuck or chunks that are broken off a...

APN-4 is a cast aluminum plate that measures 1/2" X 6" X 12" and weighs approximately 4 pounds. You can expect some chill lines and a cast finish. Some air can get trapped during this process...

APN-6 is a cast aluminum plate that measures 3/4" X 6" X 12" and weighs approximately 6 pounds. You can expect some chill lines and a cast finish. Some air can get trapped during this process...

APN-8 is a cast aluminum plate that measures 1" X 6" X 12" and weighs approximately 8 pounds. You can expect some chill lines and a cast finish. Some air can get trapped in the plate during the...

Materials Ar500, Metal, Steel 3" Steel Jumping Targets You will always have something to shoot at with this unique reactive target. Never walk down range to adjust. Each...

Materials Ar500, Metal, Steel 4" Steel Jumping Targets You will always have something to shoot at with this unique reactive target. Never walk down range to adjust. Each...

  3/8" Thick AR500 targets easily withstand rifle rounds up to 7.62 and are the preferred choice for rifles. Ensure speed of bullet in below 2900fps at point of impact to avoid pitting...

  3/8" Thick AR500 targets easily withstand rifle rounds up to 7.62 and are the preferred choice for rifles. Ensure speed of bullet in below 2900fps at point of impact to avoid pitting...

  3/8" Thick AR500 targets easily withstand rifle rounds up to 7.62 and are the preferred choice for rifles. Ensure speed of bullet in below 2900fps at point of impact to avoid pitting...