Rotometals.com

The nylon tips on our NH1 nail hammer are specially made to prevent damage to nails during installation. The handle is designed for comfort and durability. Head width: 6...

These are little irregular bb shape metal pieces that are a mix of Tin and Bismuth   They are very easy to melt  400-550F range in a metal spoon and great for...

Sold by the Pallet Boxes about 55 lbsGreat for making your own castings or little parts out of nice clean zinc. Each Zinc Ball 99.95%  We sell these 2" zinc balls also in the form of 5 pound...

Materials Ar500, Metal, Steel 2" Steel Jumping Targets You will always have something to shoot at with this unique reactive target. Never walk down range to adjust. Each...

Here is an example of a custom boat anode. This is ~4.5  pounds and made of  zinc. It measures 9 inches x 2 inches x 1" with 2 bushings are 1/2"  4" ctc. We can do custom boat...

This is a casted  Block of  Lead 99% + minimum, that measures ~6"x6"x7"  +/- 1/4"   weight 98-104 lbs, Chill lines will show but can be machined or sanded off   Some...

The above is an example of one of the custom sailboat keels that we have poured. This one we stock the mold,  is about 6"x7"x96"   +/  1/2"    If you need a similar...

Sold by the Ingot. Sds hereAn ingot of Roto158F will average approximately 1 pound and consists of 50% Bismuth, 26.7% Lead, 13.3% Tin, 10% Cadmium. This alloy melts at approximately 158 degrees F...

Galinstan is a family of eutectic alloys of gallium, indium, and tin which are liquid at room temperature. Due to the low toxicity and low reactivity of its component metals, it finds use as a...

TIN Cast Plate 3/4" x6"x12"   +/-  1/8"  99.8% min Physical InformationAtomic Number: 50Relative Atomic Mass: (12C=12.000): 118.71Melting Point: 450 F Boiling Point: 4100...

This is a cast zinc plate that is 1/2" X " X 24  " weighs about 18 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.  +/-...

This is a zinc cast plate. We pour these plates at  about 0.5x12x17 and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not be...