Rotometals.com
Anode M-Clamp C/W Bolt and Nuts for Bolting Anodes On
(No reviews yet)
Write a Review
- SKU:
- mclamp
- MPN:
- 547891
- Availability:
- Usually Ships in 24 to 48 Hours
- Weight:
- 2.00 LBS
- Shipping:
- Calculated at Checkout
Description
This is a M Clamp used to bolt on ballast tank anodes, and can also we used to bolt on other rod type anodes
5.25" Over all height
2-5/8" Deep
Related Products
Aluminum Anode Ingot ~2 Pounds
Rotometals.com
$13.20
Sold by the ingot.An ingot of Aluminum anode material consisting of 95% Al, 5% Zn weighs approximately 2 pounds and measures 1" x 2" x 9".Atomic Number: 13Atomic Mass: 26981539 amuMelting Point: 1220...
Divers Dream Plate Zinc Anode Bolt on .5" x 6" x 12" CB-08-C1
Rotometals.com
$42.50
Often called "Diver's Dream," or "Diver's Plate," or DP-1, these anodes are made of galvanized steel cast into zinc and may be bolted on.
Specifications
No Free Shipping
Semi Circle Zinc Anode 14.5"
Rotometals.com
$139.34
A Commercial anode containing a 2- 5/8" bushing giving you 1/2" hole access
about 14.5" lng x 7.25" and 1" thick
Holes CTC is 6"
Made to cu
Zinc Anode 9" X 3" X 2" with 5" CENTER TO CENTER 1/2" BOLT HOLE, COUNTERSUNK
Rotometals.com
$90.00
Here is an example of a custom zinc anode we made for a boat application. This is a 12 lb rectangular Zinc anode. Mil-A-18001K alloy. Nominal dimensio
Zinc Anode 1.25" X 3" X 12" with 6" CENTER TO CENTER 5/8" BOLT HOLES
Rotometals.com
$50.00
Zinc Anode 1.25" X 3" X 12" with 6" CENTER TO CENTER 5/8" BOLT HOLES
