Rotometals.com
Zinc Anode 9" X 3" X 2" with 5" CENTER TO CENTER 1/2" BOLT HOLE, COUNTERSUNK
(No reviews yet)
Write a Review
- SKU:
- custom13.9
- MPN:
- 547800
- Weight:
- 12.00 LBS
- Shipping:
- Calculated at Checkout
Description
Here is an example of a custom zinc anode we made for a boat application. This is a 12 lb rectangular Zinc anode. Mil-A-18001K alloy. Nominal dimensions: 2x3x9 inches with 2 countersunk holes 1/2" at 5 inch center to center
Related Products
No Free Shipping
ZTS-5 Zinc Anode Teardrop 1.37" x 3" x 9"
Rotometals.com
$23.75
The ZTS-5 is a teardrop shaped anode containing a single 12", cast-in galvanized steel strap that you can weld on or drill holes into to bolt on to surface to be protected. This anode measures 3" x 1...
Caterpillar 6L2288 Engine Zinc Anode 1/2" NPT x 2"
Rotometals.com
$5.81
E-2 Engine Zinc Anode 1/2" NPT x 2" length.
Engine pencil zincs complete with end plug.
Zinc Pencil Length: 2" Diameter: 5/8"
Wrench size: 7/8
Plug NPT = 1/2"
Picture is of a...
E-2 Engine Zinc Anode 1/2" NPT x 2"
Rotometals.com
$6.16
E-2 Engine Zinc Anode 1/2" NPT x 2" length.
Engine pencil zincs complete with end plug.
Zinc Pencil Length: 2" Diameter: 5/8"
Wrench size: 7/8
Plug NPT= 1/2"
Also works for...
Zinc Anode 1.25" X 3" X 12" with 6" CENTER TO CENTER 5/8" BOLT HOLES
Rotometals.com
$50.00
Zinc Anode 1.25" X 3" X 12" with 6" CENTER TO CENTER 5/8" BOLT HOLES
Zinc Rod Anode, 1-1/2" diameter x 4" long with Center Hole at 7/16"
Rotometals.com
$105.00
Diameter 1-1/2", Length 4", Center Hole 7/16"
These are cast zinc rods, chill lines and pocket voids can be expected.
This is an example of the chemical composition for Mil-A-18001K
ELEMENT
Zn...
