Zinc Cast Plate 1"x15"x17"
- SKU:
- ZincPlateCast1.15.17
- Weight:
- 74.00 LBS
- Shipping:
- Calculated at Checkout
Description
This is a zinc cast plate. We pour these plates at about 1x15x17
These can shrink a little during the solidifying process.
The plate is hand poured, and the top and bottom will not be perfectly smooth, there may be chill lines and or some concave spots due to shrinkage.
These plates ship via LTL freight on a pallet. Each plate weights approximately 74 pounds.
ELEMENT
Zn % Balance
Fe % 0.001
Cu % 0.001
Cd % 0.054
Pb % 0.002
Al % 0.240
Related Products
Related Products
Zinc Cast Plate - 0.5"x12"x17"
Rotometals.com
$270.00
This is a zinc cast plate. We pour these plates at about 0.5x12x17
and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not be...
ZPN-20 Zinc Cast Plate - 1" x 6" x 12"
Rotometals.com
$83.00
This is a cast zinc plate that measures 1" x 6" x 12" and weighs approximately 18.4 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.
Sides are tapered...
Zinc Cast Plate - 3/4" x 6" x 6"
Rotometals.com
$27.00
This is a cast zinc plate that is 3/4" X 6" X 6" weighs about 7 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.
ELEMENT
Zn %...
Zinc Cast Plate - 1.875" x 25" x 25"
Rotometals.com
$1,199.00
This is a zinc cast plate. We pour these plates at about 1.875"x25" x25" and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not...
Zinc Cast Rods - 1" Diameter x 1 Foot
Rotometals.com
$15.77
Diameter 1" +/- 1/16" x 12"Approx Weight per Foot 2.44 lbs
These are Cast zinc Rods, chill lines can be expected.
This is an example of the chemical composition for Mil-A-18001K
E
ZHN-6 Zinc Cast Plate - 3/8" x 6" x 12"
Rotometals.com
$44.00
This is a cast zinc plate that measures ~3/8" x 6" x 12" and weighs approximately 6.3 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...