Roof Flashing 1/16" Lead Sheet 30" x 30" 92 Sheets
- SKU:
- LeadFlash30
- UPC:
- MPN:
- 547667za
- Availability:
- In Stock
- Weight:
- 2,120.00 LBS
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$4,214.00
Was:
— You save
Description
These lead flashing sheets come 92 sheets to a pallet. They measure 1/16" x 30" x 30".
Related Products


(4#) Sheet Lead 1/16" 1' x 1'
Rotometals.com
MSRP:
Now:
$24.75
Was:
This lead sheet is 1/16" thick and weighs approximately 4 pounds. Please note, all lead sheets have a tolerance of +/- .005" in thickness and cut sizes have a tolerance of +/- .125" in length and...
No Free Shipping


(4#) Sheet Lead 1/16" 1' x 25'
Rotometals.com
MSRP:
Now:
$301.00
Was:
This lead sheet is 1/16" thick and weighs approximately 100 pounds. Please note, all lead sheets have a tolerance of +/- .005" in thickness and cut sizes have a tolerance of +/- .125" in length and...
No Free Shipping


(16#) Sheet Lead 1/4" 1' x 1'
Rotometals.com
MSRP:
Now:
$48.00
Was:
This lead sheet is 1/4" thick and weighs approximately 16 pounds. Please note, all lead sheets have a tolerance of +/- .005" in thickness and cut sizes have a tolerance of +/- .125" in length and...

Roof Flashing 1/16" Lead Sheet 36" x 36" 35 Sheets - Freight Included
MSRP:
Now:
$2,995.00
Was:
These lead flashing sheets come 35 sheets to a pallet. They measure 1/16" x 36" x 36".

Roof Flashing 1/24" Lead Sheet 30" x 30" 74 Sheets - Freight Included
MSRP:
Now:
$2,995.00
Was:
These lead flashing sheets come 74 sheets to a pallet. They measure 1/24" x 30" x 30"
Customers Also Viewed

Roof Flashing 1/16" Lead Sheet 36" x 36" 35 Sheets - Freight Included
MSRP:
Now:
$2,995.00
Was:
These lead flashing sheets come 35 sheets to a pallet. They measure 1/16" x 36" x 36".

Roof Flashing 1/24" Lead Sheet 30" x 30" 74 Sheets - Freight Included
MSRP:
Now:
$2,995.00
Was:
These lead flashing sheets come 74 sheets to a pallet. They measure 1/24" x 30" x 30"
On Sale


Pure Soft Lead Metal 99.9% ~ 5 Pound Ingot
Rotometals.com
MSRP:
Now:
$12.99
Was:
$13.99
Sold in 5 pound increments.
These ingots are made of 99.9%+ new, clean lead. The ingots measure 8-3/4" x 1" x 2" and weigh approximately 5 pounds. The Brinell Hardness scale of 99.9% Lead is...

Pure Lead Nuggets 99.9% - Approximately 1 pound
Rotometals.com
MSRP:
Now:
$3.29
Was:
Sold by the pound
Please note that orders containing over 20 pounds of nuggets are likely to be shipped in bulk, rather than in 5 pound bags. If you need the nuggets in the five pound bags, please...


Lead Plugs / Discs for screw penetrations on Radiation Shielding Walls 100 quantity
Rotometals.com
MSRP:
Now:
$26.00
Was:
These are punched out plugs for covering up screw holes when installing Radiation shielding lead Gypsum Board /sheet rock. Important: There are approximately 100 pieces each...
No Free Shipping


RM-48 Zinc Anode 2.25" x 4.5" x 24"
Rotometals.com
MSRP:
Now:
$192.00
Was:
The RM-48 Zinc anode is particularly suited for major ships, 10,000 DWT and upward. It measures 2.25" x 4.5" x 24", weighs approximately 45 lbs and has a single galvanized steel longitudinal...
No Free Shipping


RM-35 Zinc Anode 3" x 3" x 15"
Rotometals.com
MSRP:
Now:
$140.00
Was:
The RM-35 Zinc Anode may be clamped on to the surface to be protected and is mainly for use in tanks and underground. It measures 3" x 3" x 15", comes with a 19" steel rod and weighs approximately 35...
No Free Shipping

Lead Plate - 0.157" x 4' x 4' - Discount Sheet
Rotometals.com
MSRP:
Now:
$329.00
Was:
This lead sheet is 0.157" thick and weighs approximately 192 pounds. There is some slight damage due to shipping. Please note, all lead sheets have a tolerance of +/- .005" in thickness and cut sizes...

REGALV Galvanizing Repair Stick
Rotometals.com
MSRP:
Now:
$15.99
Was:
RotoMetals Regalv galvanizing repair stick restores corrosion-resistant zinc-like finish on galvanized plates, shapes, pipe, rods, sheets, etc.
after welding, cutting, abrasion or other...


(4#) Sheet Lead 1/16" 1' x 1'
Rotometals.com
MSRP:
Now:
$24.75
Was:
This lead sheet is 1/16" thick and weighs approximately 4 pounds. Please note, all lead sheets have a tolerance of +/- .005" in thickness and cut sizes have a tolerance of +/- .125" in length and...