Rotometals.com
Jet-Lube Penetrant Lubricant 12/34 Spray
(No reviews yet)
Write a Review
- SKU:
- Jetlube
- MPN:
- 54752856
- Availability:
- in stock
- Weight:
- 1.00 LBS
- Shipping:
- Calculated at Checkout
Description
12|34 is an industrial penetrating, moisture displacing, lubricating and corrosion preventative lubricant and penetrant. It excels where saltwater, salt spray or other harsh environments are encountered. 12|34 gives total performance while being environmentally safe and easy to use.
Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils which provide superior protection and antiwear properties.
Penetrates: Rusted and frozen metal parts - studs, nuts, screws, pins, linkages - are easily loosened by means of superior “creepability.”
Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin, non-greasy film that prevents additional moisture from clinging or entering.
Prevents Rust and Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments.
Cleans: Low viscosity dissolves grease and oil for easy removal. Cleans dirt, dust and grit for easier penetration and quicker rust-busting.
Applications
(Industrial) MRO
Automotive
Motorcycles and Powersports
Marine and General Use
Frozen nuts and bolts
Rust Prevention
Chains
Cables
Door locks
Hinges
Tools
Firearms
Landscaping equipment
Much more
Benefits
Non-evaporating
Non-conductive
Chemically stable
Never hardens or dries out
Economical to use
Contains no fluorocarbons or silicones
Specifications
Base Materials
Amber
Certifications
Meets the Requirements of MIL-PRF-81309
Service Rating
-75°C to 150°C
-100°F to 300°F
Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils which provide superior protection and antiwear properties.
Penetrates: Rusted and frozen metal parts - studs, nuts, screws, pins, linkages - are easily loosened by means of superior “creepability.”
Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin, non-greasy film that prevents additional moisture from clinging or entering.
Prevents Rust and Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments.
Cleans: Low viscosity dissolves grease and oil for easy removal. Cleans dirt, dust and grit for easier penetration and quicker rust-busting.
Applications
(Industrial) MRO
Automotive
Motorcycles and Powersports
Marine and General Use
Frozen nuts and bolts
Rust Prevention
Chains
Cables
Door locks
Hinges
Tools
Firearms
Landscaping equipment
Much more
Benefits
Non-evaporating
Non-conductive
Chemically stable
Never hardens or dries out
Economical to use
Contains no fluorocarbons or silicones
Specifications
Base Materials
Amber
Certifications
Meets the Requirements of MIL-PRF-81309
Service Rating
-75°C to 150°C
-100°F to 300°F
Key Features:
-
BOEING-APPROVED + MIL-PRF-81309H(1): Fully QPL-listed for Type II, Class 1 (Bulk Liquid) and Class 2 (Aerosol) by the U.S. Department of Defense.
-
4-in-1 Performance: Penetrates rust, displaces moisture, lubricates, and prevents corrosion—one spray, total protection.
-
Ashless EP Additives: Offers exceptional antiwear protection and lubricity on studs, nuts, linkages, and gear surfaces.
-
Long-Term Corrosion Resistance: Adheres with a non-greasy barrier film that prevents rust in marine, electrical, and mechanical settings.
-
Safe for Electrical Systems: Non-conductive and stable from -100°F to 300°F, ideal for terminals, winches, and motorsports applications.
-
VOC-Exempt & Silicone-Free: Clean performance without fluorocarbons, silicones, or residue buildup.
MUST SHIP GROUND - LOWER 48 only - No Air Shipping
Key Safety and Handling Information:
- Flammability: Extremely flammable aerosol; keep away from heat, sparks, open flames, and hot surfaces.
- Hazards: May be fatal if swallowed and enters airways; contains gas under pressure.
- Precautions: Use in well-ventilated areas, do not breathe spray, and do not smoke while using.
- Protective Equipment: Wear safety glasses and chemical-resistant gloves (neoprene or nitrile).
- Storage: Protect from sunlight and do not expose to temperatures exceeding 122 degrees F.
- First Aid: If swallowed, immediately call a POISON CENTER/doctor and do not induce vomiting.
Related Products
Related Products
Lead Plugs / Discs for screw penetrations on Radiation Shielding Walls 100 quantity
Rotometals.com
$26.00
These are punched out plugs for covering up screw holes when installing Radiation shielding lead Gypsum Board /sheet rock. Important: T
.008" Zinc Sheet - 34 Gauge
Rotometals.com
$7.35 - $116.59
Zinc Sheet - .008" Thickness - This is like foil and will come with crinkles, not perfectly smooth. DO NOT use for counter tops, because this thickness of sheet won't hold up to wear and tear like a...
Zinc Etching Plate - 12" x 12"
Rotometals.com
$33.27
Zinc Etching Plate is 14-15 gauge, .060" inches thick 12" x 12", unpolished. The surface may be polished to photo-engraver's quality prior to etching if desired. The back of the plate requires...
Zinc Cast Plate - 1" x 12" x 12"
Rotometals.com
$170.00
This is a cast zinc plate that measures 1" X 12" X 12" and weighs approximately 37 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...
Sealer Premium Spray Ever Clear for Zinc and Metal Countertops - For Horizontal Surfaces
Rotometals.com
$54.95
Ever Clear is a clear, air-drying, two part lacquer designed to provide the best and strongest protection for most surfaces and finishes. Use Ever Clear on your toughest jobs including counter tops,...