Rotometals.com

Type 6 lb Mil-Spec Zinc Alloy A-18001K Zinc Crab/Lobster Pot anode .5"/13 NC thread coupling nut that screws on. This anode is 1.5" thick and has a 4-3/8" diameter.     ELEMENT Zn %...

This is a whole pig of lead weighing about 17.5 x 3.5 x 2.5 inches. Average weight: 45-50 pounds.   When cut in half the length is what is cut, the other dimensions remain the same. ...

These are Antimonial Ingots that average 99.65% . Each ingot weighs about 40-55 pounds and measures approximately 7.25"x 9.5"x 3" High". Expect some surface oxide and corroding.Atomic Number -...

These are Antimonial Lead Ingots that average 96-97% lead and 2-4% Antimony. 14” long x 3.25” wide x 2.25” tall.    Ships from East Coast only Weight: 33-35 pounds each...

30/70 Solder Notch bar contains 30% Tin / 70% Lead. This is a 1000 pound pallet. MUST SHIP FREIGHT. (If this is going to residence, rural area, farm or remote location, extra charges will...

This is a 1000 pound pallet   Dimensions Each ingot weighs approximately 58-63 lbs each  ~3.25"x4"x18"   Ships from East Coast only  This is a pallet of angled ingots...

  This is a 500 pound pallet of Lead  Pipe / Sleeve These are made to order please  email us for a quote then we will revise listing with your total   Please...

Hardball Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead. This modern version of the old Lyman #2 is an excellent all-around alloy for most handgun bullets and many higher velocity...

This is a 1000 pound pallet of Lead Ingots (99.9%)  Ingot size and weight will vary but most are  ingot weighs approximately 45-62 (+/- 5 ) pounds (99.9%) and measures approximately 21...

This is a 1000 pound pallet of Lead Spheres (99.9%)  Each String of Spheres is about 14-16 pounds so each  round section si 5-6 pounds each and easy to cut or twist...

Lyman Bullet Casting Alloy consists of 5% tin, 5% antimony and 90% lead.    The Brinell Hardness of this Lyman 2 alloy is about ~ 16.   If you want smaller 5...

With a 200-1000 F. temperature range, stainless steel construction, large numbers printed on a 1-1/2" covered face, and +/- 1 accuracy, this lead thermometer lets you pour lead at the optimum...