Rotometals.com

This is a 2.219 " Zinc Cannon Ball for a Pop Can Mortar.  Note - can range between 2.219" - 2.234".   Zinc cannon ball for 2 ¼ steel lined bores...

This is a 2.59" Zinc Cannon Ball for a Pop Can Mortar. Each cannon ball weighs about 2.3 pounds and is made from new clean zinc. Come right out of the mold for you to cut off gates and grind to your...

This is a golf ball-sized Zinc Cannon Ball for a golf ball mortar.Each cannon ball weighs about 0.6 pounds, measures approximately 1.67"   up to 1.70  and is made from new clean zinc...

This is a cast zinc plate that is 1/2" X 4" X 36  " weighs about 18 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.  +/-...

This is a zinc cast plate. We pour these plates at 24"x 48" and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not be perfectly smooth,...

This is a zinc cast plate. We pour these plates at  about 1.875"x25" x25" and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not...

This is a cast zinc plate that measures 1" X 12" X 12" and weighs approximately 37 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...

This is a cast zinc plate that is 1" x 6" x 6" and weighs approximately 9.3 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...

This is a cast zinc plate that measures 1/2" x 6" x 6" and weighs about 4.6 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...

This is a cast zinc plate that is 3/4" X 6" X 6" weighs about 7 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.   ELEMENT   Zn %...

Quantity= Total Feet, ie. 3 quantity = 3 feetPlease Specify in order comments if you want 1,2 or 3 feet long pieces. These are Cast zinc Rods, chill lines can be expected. Diameter Max...

Beautiful Solid Zinc Downspout coil. We carry Zinc coils to fit your 5" & 6" gutter machines in 16 oz (7mm , .027")and 18 oz (8mm , .030") as well as downspout coil in 16oz. Minimum order is 300...