Home > ZINC SHEETS >   ZINC-SHEET-.030"-X-39"-X-96"-w/ Kinks, and FREE-Freight!
	Our Price: $92.00 Product Code: ZS0303996DING Qty:

Description   These sheets have a few dings and ripples in one spot on the sheet. There are about 30" in from one end and 9" end from the side. Some Nails on the bottom of the pallet pushed through so now we have a few sheets that have these marks in them. They are not perfect so we are drastically discounting them and offering free freight rolled up via UPS Ground. These sheets would work well for smaller projects or outside areas, where you don't have to have a perfect sheet or if you don't mind if you have more character in the sheets with wear and tear. If you buy more than 4, the price will go even lower! Call if you have any questions. ATTENTION Due to the shipping, some scratches and blemishes should be expected. Metal sheets, just like their antique counterparts, may contain a certain amount of flaws, smudges, and scratches especial after shipping. Most of these can be buffed off using 0000 Steel Wool. Typically after the sheet has been cut and fabricated into the final area, a patina or finish is achieved and so most of those marks will be buffed off anyways. Do not expect to get a perfectly clean sheet. IMPORTANT make sure you un roll and reverse lay the sheet to help it relax and flatten back out faster. You also may apply some heat to help relax it. If you leave the sheet in the shipping tube for more then 10-12 days then it becomes harder to un roll it.

Related Products... Cupric Sulfate Patina Zinc Sheet Our Price: $14.99 Add Spray Lacquer Sealer Flat for Zinc Our Price: $18.99 Add ZINC-SHEET-.027"-X-12"-X-12"--Approx Sale Price: $6.00 Add ZINC-SHEET-.027"-X-39"-X-120"-w/ Kinks, Waves and FREE-Freight! Our Price: $99.00 Add ZINC-SHEET-.030"-X-39"-X-120"-w/ Kinks, Waves and FREE-Freight! Our Price: $129.00 Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: ZINC SHEETS

	Low-Melting-Point Bismuth Based Ingot 281-338-ALLOY $14.95
	ALLOY AC Casting Pewter Ingot $12.99 or less!
	PEWTER-SHEET-.064-X-12"X24" $130.00
	ZINC-SHEET-.030"
	Casting-Ladle bottom pour Rowell #1 $24.00
	E-1G ENGINE ZINC ANODE 3/8"NPT x 1" $4.51
	E-1D ENGINE ZINC ANODE 3/8"NPT x 1-3/4" $4.51
	50 Tin / 50 Lead BAR Solder 1lb $7.99
	ZINC-DISC-6"-DIA-x-1"-THICK $21.90